Komatsu D51PX-24

"

MACHINE KEY DETAILS

Make:
Komatsu
Model:
D51PX-24
Stock No:
70564
Year:
2017
Hours:
3167
Location:
Southampton
Weight:
14,260 KG
HP:
131 HP
Enquire Online

Rippers available at an additional cost.

View Full Inspection Report

ENGINE
Blow by
Minimal to none
Knocking
No knocking
Air cleaners
Good
Any smoke
minimal to none
Oil or fuel leaks
No
General running condition
Really good
TRANSMISSION
Gear change
HST is good
Steering
Responsive
Oil leaks
No
Is the transmission noisy?
No
Controls
Very good
General running condition
Really good
U/C
Shoe width
710mm
Shoe height
50mm 70%
Shoes - any wear in trailing edge?
Minimal
Rail height
100mm 65%
Any signs of link failure
No links have failed
Average diameter of pins and bushings
58mm 65%
Have pins been turned on chains
No
Sprockets
Even wear on both, slight wear on tips. 60% on both
IDLERS
Left side front idler
10mm running thickness, concave wear of 5mm +
Right side front idler
10mm running thickness, concave wear of 5mm +
TOP ROLLERS
Left side 1st roller
140mm & 134mm, 40%
Left side 2nd roller
137mm & 136mm, 40%
Right Side 1st roller
136mm & 132mm, 40%
Right side 2nd roller
140mm & 136mm, 40%
BOTTOM ROLLERS
Roller 1
Visual only, 40%
Roller 2
Visual only, 40%
Roller 3
Visual only, 40%
Roller 4
L/H: 152mm, 40%. R/H: 153mm, 40%
Roller 5
L/H: 150mm, 40%. R/H: 154mm, 40%
Roller 6
Visual only, 40%
Roller 7
Visual only, 40%
CAB
Cab mounts - any wear?
No
Back up alarm
Loud and clear
Battery isolator switch
Manual and electric
Lights
All working
Wipers
All working
Heater
Good heat
A/C
Nice and cold
Seat condition
Some staining, no damage
Cladding condition
Good condition
Floor mat condition
Good clean condition
Seat belt
Works as should
Mirrors
Rear view only
Horn
Loud and clear
Cab mounts
No
Cab glass condition
All in good condition
Cab glass any crack
No damage
Any perspex fitted
None fitted
Steps and grab handles secure?
All present
BLADE
Blade type
6 Way
Blade width
3345mm
Blade height
1190mm
Main lift rams - wear in pins
L/H: 0mm & 1 - 2mm, R/H: 0mm & 1 - 2mm
Swivel rams - wear in pins
L/H: 0mm & 0mm, R/H: 0mm & 1mm
Tilt ram - wear
1 - 2mm & 1 - 2mm
Ball joint wear
3mm
C Frame
2mm & 2mm
Face / Moldboard
Good, no damage
Spill rack condition
No damage
Cutting edges condition
40mm left
Have cutting edges been turned
Yes
General blade condition
Really good
PANELS & PAINT / DECALS
Paint condition
Faded but fair
Any rust patches
Usual areas
Condition of decals
To be replaced
DIMENSIONS
Length
Width
Height
Measurement with blade straight
4870mm
3345mm
3100mm
Measurement with blade turned
5570mm
2960mm
3100mm
Measurement from outside to outside of tracks
2590mm
Measurement with blade straight
Length: 4870mm
Width: 3345mm
Height: 3100mm
Measurement with blade turned
Length: 5570mm
Width: 2960mm
Height: 3100mm
Measurement from outside to outside of tracks
Length:
Width: 2590mm
Height:

Enquire online

Compare to other Machines

make
Komatsu
model
D51PX-24
stock no
70538
year
2018
hours
2286
location
Southampton
weight
14,260 KG
hp
131 HP
More Info
make
Komatsu
model
D51PX-24
stock no
70545
year
2017
hours
1840
location
Southampton
weight
14,260 KG
hp
131 HP
More Info

Subscribe

Find out when new models come in