KOMATSU D61PXI-24 70606

SOLD
"

MACHINE KEY DETAILS

Make:
Komatsu
Model:
D61PXI-24
Stock No:
70606
Year:
2016
Hours:
7618
Location:
Southampton
Weight:
19,460 KG
HP:
169 HP
Back to Current Stock

Rippers available at an additional cost.

View Full Inspection Report

ENGINE
Blow by
Minimal to none
Knocking
No knocking
Air cleaners
Good
Any smoke
Minimal to none
Oil or fuel leaks
Minimal fuel leak from filter
General running condition
Runs well
TRANSMISSION
Gear change
HST works well
Steering
Good steering
Oil leaks
None visible
Is the transmission noisy?
No
Controls
Good controls
UNDERCARRIAGE
Shoe width
858mm
Shoe height
48mm. Good height but grousers are thin, 4mm tips aposed to 8mm tips. Shoe Height 80%, Shoe condition 30%
Rail height
116mm, 65%
Any signs of link failure
No
Average diameter of pins and bushings
57mm, 60%
Have pins been turned on chains
Yes, Pins worn top and bottom
Sprockets
O/S Sprocket worn down, deformed tips 10%. N/S Sprocket ok but getting thin 30%
IDLERS
Left side front idler
12mm - 13mm running condition. Some concave wear, edges chipping. 50%
Right side front idler
12mm - 13mm running condition. Some concave wear, edges chipping. 50%
TOP ROLLERS
Left side 1st roller
162mm, 158mm 60%
Left side 2nd roller
164mm, 162mm 60%
Right side 1st roller
145mm, 143mm 35%
Right side 2nd roller
161mm, 160mm 60%
BOTTOM ROLLERS
Roller 1
180mm, 181mm 45%
Roller 2
184mm, 181mm 45%
Roller 3
184mm, 183mm 45%
Roller 4
184mm, 168mm 45%
Roller 5
184mm, 184mm 45%
Roller 6
185mm, 185mm 45%
rest of rollers
Visual only
CAB
Any wiring for laser system
Yes
Back up alarm
Loud and clear
Battery isolator switch
Manual and electric working
Lights
All working
Wipers
All working
Heater
Good heat
A/C
Nice and cold
Seat condition
Worn fabric, Mechanically good
Cladding condition
Dirty, Arm rest worn
Floor mat condition
Good condition, No wear or tears
Seat belt
Working as should
Mirrors
Rear view only, no damage
Horn
Loud and clear
Cab mounts
Worn out
Cab glass condition
Good condition all round
Cab glass have any cracks?
No cracks
Any perspex fitted
None fitted
Steps and grab handles secure?
All fitted, one slightly bent
BLADE
Blade Type
PAT 6 Way
Blade width
3835mm
Blade height
1300mm Including spill rack
Main Lift rams, wear?
3mm, 3mm, 3-4mm, 3mm
Swivel rams, wear?
1mm, 1mm, 0mm, 0mm
Tilt ram, wear?
2mm, 1mm
Link ram, wear?
1mm, 1mm
Ball joint, wear?
7mm
C Frame, wear?
12-15mm, 7-10mm
Face / Moldboard
No damage, thin face
Spill rack condition
Some damage
Cutting edges condition
25mm left
Have cutting edges been turned
No
General blade condition
Average
PAINT & DECALS
Any damage to panels
No panel damage
Paint condition
Average paint, Bit faded / Rusty
Any areas repainted
No
Any rust patches
Yes, Around panel edges, track frames
Condition of decals
To be replaced

Enquire online

Compare to other Machines

make
Komatsu
model
D61PXI-24
stock no
70606
year
2016
hours
7618
location
Southampton
weight
19,460 KG
hp
169 HP
More Info

Subscribe

Find out when new models come in