KOMATSU D65PX-18 70594

SOLD
"

MACHINE KEY DETAILS

Make:
Komatsu
Model:
D65PX-18
Stock No:
70594
Year:
2018
Hours:
2855
Location:
Southampton
Weight:
23,659 KG
HP:
217 HP
Back to Previous Stock

Rippers available at an additional cost.

Request a Video Call?

Why not request a video call with the qualified technician who carried out the full inspection, so they can run you through all the details of the machine.

Request a call

View Full Inspection Report

ENGINE
Blow by
Minimal to none
Knocking
no knocking
Air cleaners
Good
Any smoke
Minimal to none
Oil or fuel leaks
no leaks
General running condition
Runs well
TRANSMISSION
Gear change
Good gear change
Steering
Responsive
Oil leaks
No leaks
Is the transmission noisy?
No
Torque converter
Good
Controls
Good controls
General running condition
Runs and drives well
UNDERCARRIAGE
Shoe width
915mm
Shoe height
55mm, 85%
Shoes - any wear in trailing edge?
Minimal
Rail height
129mm, 85%
Any signs of link failure?
No
Average diameter of pins and bushings
70mm, 85%
Have pins been turned on chains
No
Sprockets
87mm gape, 15mm tips. Sprockets have even wear and are in good shape, 80%
IDLERS
Left side front idler
12mm running thickness, minimal concave wear. 1-2mm, 75%
Right side front idler
12mm running thickness, minimal concave wear, 1-2mm. 75%
TOP ROLLERS
Left side 1st roller
181mm, 179mm. 70%
Left side 2nd roller
179mm, 176mm. 70%
Right side 1st roller
180mm, 181mm. 70%
Right side 2nd roller
180mm, 179mm. 70%
BOTTOM ROLLERS
Roller 1
189mm, 190mm. 75%
Roller 2
190mm, 190mm. 75%
Roller 3
190mm, 191mm. 75%
Roller 4
191mm, 191mm. 75%
Roller 5
194mm, 195mm. 75%
Roller 6
194mm, 195mm. 75%
Roller 7
194mm, 192mm. 75%
Roller 8
Visual only, 75%
CAB
Cab mounts - any wear?
No wear
Any wiring for laser system
no
Back up alarm
Loud and clear
Battery isolator switch
Manual and electric
Lights
All lights working
Wipers
All working
Heater
Good heat
A/C
Fairly cold
Seat condition
In good shape, no damage
Cladding condition
Good condition
Floor mat condition
No wear, small tear
Seat belt
Working as should
Mirrors
Rear view only, no damage
Horn
Loud and clear
Cab mounts
All mounts ok
Cab glass condition
Good, condition
Cab glass any cracks
No cracks
Any perspex fitted
None fitted
Steps and grab handles secure?
All fitted, undamaged
BLADE
Blade type
PAT 6 way
Blade width
4280mm
Blade height
1400mm
Main lift rams, wear
1mm, 1mm, 2mm, 2mm
Swivel rams, wear
0mm, 0mm, 0mm, 0mm
Tilt ram, wear
1mm, 0mm
Ball joint, wear
3-4mm
Link ram, wear
1mm, 1mm
C Frame, wear
3-4mm, 3-4mm
Equaliser bar, wear
3mm, 3mm, 1-2mm
Face / Moldboard
In good shape
Spill rack condition
All fitted undamaged
General blade condition
Overall good
PAINT & DECALS
Any damage to panels
No damage to panels
Paint condition
Fair, faded
Any areas repainted
No
Any rust patches
Few areas, Track frames mostly
Condition of decals
To be replaced

Enquire online

Compare to other Machines

Subscribe

Find out when new models come in