CAT D7E LGP

KOMATSU D65PXI-18

Rippers available at an additional cost

KOMATSU D65PX-18

Rippers available at an additional cost.

KOMATSU D65PX-18

Rippers available at an additional cost

KOMATSU D65PX-18

Rippers available at an additional cost.

KOMATSU D65PX-18

Rippers available at an additional cost

KOMATSU D65PX-18

KOMATSU D65PX-15

HAMM H13I

PadFoot Kit

HAMM H13I

CAT CS66B

Padfoot kits available

Cat D6T LGP VPAT

Cat C9.3 engine, 244 HP, system one u/c, accugrade ready VPAT, rigid long drawbar & rear counterweight & extra slab, ripper hydraulics (VPAT), rear view camera, precleaner, Cat grade control with slope assist, Rippers available at an additional cost

Cat D6T LGP VPAT

CAT C9.3 engine, 244 hp, System one U/C, accugrade ready VPAT, rigid long drawbar & rear counterweight & extra slab, ripper hydraulics (VPAT), rear view camera, precleaner, CAT grade control with slope assist. machine is 3700mm turned. 4010mm straight. Rippers available at an additional cost.

CAT D6T LGP

Rippers available at an additional cost

CAT D6T LGP

Rippers available at an additional cost

CAT D6N LGP

Rippers available at an additional cost

CAT D6N LGP

Rippers available at an additional cost.

CAT D6N LGP

1.4 tonne Rippers available at an additional cost.

KOMATSU D61PXI-24 (For Hire Only)

Rippers available at an additional cost.

For Hire Only.

KOMATSU D61PX-24

Rippers available at an additional cost

Komatsu D61PX-24

Rippers available at an additional price

KOMATSU D61PX-24

Rippers available at an additional cost.

KOMATSU D61PX-23

Komatsu D51PX-24

Rippers available at an additional cost.

KOMATSU D39PXI-24

Rippers available at an additional cost.

Komatsu D39PX-24

Rippers available at an additional cost

CAT 140M2 VHP PLUS EARTHWORKS

Trimble Earthworks Ready, Tier 4 Engine, ACCUGRADE READY, CAB W/ HEAT & A/C, MB: 14′, MID MOUNT SCARIFIER, AUX HYD, TYRES 14.00R24TG FRONT, 14.00-24 REAR

CAT 140M2 VHP PLUS

Push block and ripper available at an extra cost.

CAT 140M2 VHP PLUS

CAT 12M2 VHP Plus

Has Trimble GPS Wiring, New Cutting Edge Fitted

CAT 120M2

VOLVO G940B

ASHLAND 950XL2

ASHLAND 140XL2

IT’S ABOUT TIME
More capacity, wider cut, ease of loading, and fast cycling all add up to big time savings. Ashland-built reliability means maximum up-time and worry-free use. The 140XL2 is ready to take whatever you put in front of it and always ask for more.

ASHLAND 140XL2-LGP

YOU DEMAND MORE FLOTATION
When the job has to get done there’s no time to wait. That’s why we built the 140XL2-LGP for customers who require the very best. Designed for customers who need greater flotation in soft conditions. The 23.5 x 25 OTR rear tires have a longer rolling radius to keep you moving when the going gets tough.

ASHLAND 155XL2

GO BIG & GET HOME
The work has to get done and as quickly as possible. When “good enough” just won’t cut it, the 155XL2 is the answer. No special drawbar needed and lower horsepower requirements — thanks to easy rolling dolly wheels, it muscles through any job to get you in, out, and onto the next job.

ASHLAND 175XL2

UNCOMPROMISED PRODUCTIVITY

Your land is your life blood — the more you can get from it the better. The 175XL2 was built to make the most of your limited time, prepping your land for maximum production. With its larger capacity, you can quickly reshape drainage ways, repair washouts, and clear new acreage.

ASHLAND 3413E

THE 3413E UNDER 14FT. ROAD TRANSPORT
The 3413E is one of the four new ejector scrapers introduced this year. This scraper bowl width and height is the same as the 3013E. The bowl’s length is simply 12″ longer, increasing the heaped capacity to a productive 34 cu.yds. The 3413E 13ft width of cut does an excellent of cutting a wide range of material. Most large capacity scrapers under a 14ft transport width have a 12ft cutting width.

ASHLAND 3013E

THE 3013E UNDER 14FT. ROAD TRANSPORT
The 3013E is one of the four new ejector scrapers introduced this year. This scraper bowl width and height is the same as the 3413E. The bowl’s length is simply 12″ longer, increasing the heaped capacity to a productive 30 cu.yds. The 3013E is the only high capacity scraper that is under 14ft. road transport reducing your mobilization cost from costly escorts or permits.

ASHLAND 2811E

THE 2811E
Under 12ft. Road Transport
The 2811E is one of the four new ejector scrapers introduced this year. This scraper bowl width and height is the same as the 2411E. The bowl’s length is simply 12″ longer, increasing the heaped capacity to a productive 28 cu.yds. The 2811E is the only high capacity scraper that is under 12ft. road transport reducing your mobilization cost from costly escorts or permits.

ASHLAND 2411E

THE 2411E UNDER 12FT. ROAD TRANSPORT
The 2411E is the smallest model available in the large format next generation scraper. This unit has the same genetic DNA as the larger models in a 24 cu.yd. format. – it was built by engineers and skilled craftsman who have spent their lives working in the dirt searching for solutions to allow you to Do More. The 2411E is ideal for customers who work in high density areas where trucking over width loads is very costly. The 2411E is under 12ft. road transport reducing your mobilization cost from costly escorts or permits.

ASHLAND 220TS4

BORN IN THE DIRT
Contractors are a special breed. You live your work and expect the equipment you buy to work harder than you do. That’s what makes the 220TS4 unique – it was built by engineers and skilled craftsman who have spent their lives working in the dirt searching for solutions to allow you to Do More.

FEATURED UPGRADE: TEFLON BUSHINGS

Effective under the new 2018/2019 pricing, Ashland has implemented self-lubricating Teflon fiber bushings in the majority of hard-to-reach location the on the 220TS4 scraper. This feature has shortened the daily grease schedule time by nearly 40%.

The Pushoff floor rollers, hold-down roller, Apron cylinder base end, and Pushoff cylinder base end now utilize these cutting edge PTFE lined bushings. Durability is unmatched with an expected life of 1,000 to 1,500 working hours

ASHLAND 215TS2

PERFORMANCE & RELIABILITY, LOAD AFTER LOAD
Tested and refined in the mines of Texas, the 215TS2 has earned a reputation for loading efficiency and providing low cost-per-yard productivity. Commonly pulled in tandem for real effectiveness, the 215 series has been through it all. Expect more from this machine — it can handle the stress.

ASHLAND 155TS2

DO MORE IN A DAY’S WORK
From the moment dawn breaks, it’s a race to accomplish your goals before the day gives way to night. The 155TS2 gives you the upper hand. 15.5 cu. yd. capacity, 108.5” cut width and 29.5 x 25 tires offer increased productivity in your unique conditions. You’ll appreciate the heft in this industrial grade unit, so much that you may want to pull another in tandem.

ASHLAND 1410 E

THE SPEED YOU NEED
The 1410E is the fastest loading scraper in its class. Experience the precision of an ejector scraper without sacrificing time during material offload. A modular design, 2- or 4-tire option, ‘greaseless’ fiber bushings — this machine is packed with features you will not find anywhere else.

ASHLAND 140TS2-LGP

BRING ON THE FLOTATION
The 140TS2-LGP is the direct mount ejector scraper that can get through anything. Sized correctly to meet that niche of maneuverability, hauling capacity, and horsepower sweet spot. There is no reason why you cannot experience success in a single or tandem unit setup.

ASHLAND 140TS2

HOOK UP & GET TO WORK
The 140TS2 direct mount ejector scraper is perfectly at home on the construction site hauling tandems or in water management applications hauling a single. In either configuration, it is the most economical scraper in its class on a cost-per-yard basis.

ASHLAND 155TS2 EJECTOR

Heaped Capacity: 11.85 m³
Struck Capacity: 9.09 m³
Required HP: 250 -620
Cutting Width: 275.59 cm

ASHLAND 2014CS

UNMATCHED QUALITY THAT ONLY ASHLAND CAN OFFER
A direct mount, dump-style scraper for the ultimate in land leveling. For agricultural and construction applications, the 2014CS delivers maximum performance and value. Completely new from the ground up and directly conceived from customer input with their specific needs in mind. With its 14′ wide cut and 20 cubic yards of haul, we have packed 2 yards more material than its closest competitor — while using superior material and build quality. Bringing all the elements together to give you more profit every hour, day, week, and year.

ASHLAND 2012CS

SAME GREAT DESIGN IN A NARROWER PACKAGE
A direct mount, dump-style scraper meets the needs of multiple markets. For either agricultural, mining, or construction applications, the 2012CS is the right scraper for the job. Just like the 2014CS, this unit was conceived from customer input. With its 12′ wide cut and 20 cubic yards of haul, you receive a more manageable cut width without losing capacity — while using superior material and fabrication methods. Once again, bringing all the elements together to give you more profit every hour, day, week, and year.

ASHLAND 50CS

HEAVY DUTY SIMPLICITY
The 50CS, 5 cu.yd. is a fixed position dump style scraper, a modernized version of the 50S scraper our company started with over 60 years ago. Implementing upgraded manufacturing processes and high strength steel, the 50CS will perform for generations. This machine is a medium sized scraper, currently available as a drawbar mount version only. Ideal for farmers, landscapers, and weekend warriors who have real projects. With a single hydraulic remote operation for 100 HP.+ MFWD tractors, it doesn’t take much to get a lot done — truly the complete earthmoving package.

ASHLAND 3250SS

A SKID STEER CAN BE A SCRAPER
Your compact track loader just got a whole lot more valuable. The new and improved 3250SS is the second generation of skid steer scrapers from Ashland Industries. We increased the width of cut from 72″ from the earlier model to 81.5″. This makes it perfect fit for the larger CTL on the market today. We improved numerous features on this new machine. Greater clearance between the bowl and the leveling blade. Plastic apron guide reduces premature wear on the mainframe. See-thru headache rake built into the scraper bowl. No matter what your site demands, the 3250SS can cut, carry, and dump up to 3.25 cu. yds. while the integrated leveling blade handles final grading in a single pass.

TOPCON 2D CONTROL SYSTEM

RIPPER – D6T

Unused 3 shank ripper for Caterpillar D6T

RIPPER – D6N / D6M

3 SHANK RIPPER for Caterpillar D6N / D6M, Q345B Grade Steel

RIPPER – D65 / D61

2 shank ripper fits Komatsu D65 / D61. Q345B Grade Steel

Ripper – D51

Ripper Fits Komatsu D51

RIPPER – D6K

New ripper for Caterpillar D6K, Q345B Grade steel

RIPPER – D4K

Ripper Fits Caterpillar D4K

Ripper – D39

Ripper Fits Komatsu D39

PUSH BLOCK – 140M

Push block, fits CAT 140M

RIPPER – 140M

Ripper fits CAT 140M

PADFOOT KIT – H13I

New HAMM padfoot kit, fits HAMM H13i

PADFOOT KIT – CS66B

New CAT Padfoot Kits, Fits CAT CS66B

Winch – D6T / D6R / D6H

Paccar PA56 winch that fits Caterpillar D6T, D6R, D6H.

Ripper / Scarifier – VOLVO Grader

Ripper / Scarifier for sale, Taken off a VOLVO G726.

Caterpillar window protection screens

fit Cat D5N, D6N, We also have forrestry sweep bars to fit, D51PX-22, D61PX-16 and D65PX-15/16/17

PUSH BLOCK – G946

Push Block for sale, Taken off of a VOLVO G946, Stock number: 70439

CAT CS66B

Choice of Padfoot or Smooth Drum

VOLVO G930B

CAT 120M2 VHP PLUS

CAT 140M2 VHP PLUS

VOLVO G930B

VOLVO G726B

KOMATSU D65PX-17

New sprockets, New heater unit.

KOMATSU D65PX-17

KOMATSU PC210LCI-11

PIPING, SCREEN DITCH / DIGGING

KOMATSU PC210LCI-11

WITH LEHNHOFF QUICK HITCH , KOMATSU AUTO TILT BUCKET – 72”

KOMATSU D65PX-18 70628

Rippers Available at an additional cost

KOMATSU D65PX-18 70627

Rippers available at an additional cost.

CAT D6T LGP 70602

Rippers available at an additional cost.

Komatsu D65PX-18 70624

Rippers available for additional cost.

KOMATSU D65PX-18 70600

Rippers available at an additional cost

KOMATSU D61PXI-23 70431

Rippers available at an additional cost.

KOMATSU D61PXI-24 70606

Rippers available at an additional cost.

KOMATSU D61PX-24 70560

Rippers available at an additional cost

KOMATSU D65PX-18 70607

Rippers available at an additional cost

KOMATSU D61PXI-24 70584

Rippers available at an additional cost.

CAT D6T LGP 70448

Rippers available at an additional cost

CAT D6N LGP 70531

Rippers available at an additional cost

KOMATSU D61PXI-24 70587

Rippers available at an additional cost

Komatsu D61PX-24 70611

Rippers available at an additional cost

KOMATSU D65PX-18 70608

Rippers available at an additional cost.

KOMATSU D39PX-23 70597

Rippers available at an additional cost.

KOMATSU D61PX-24 70581

Rippers available at an additional cost.

HAMM H13I 70529

KOMATSU D39PX-24 70598

Wired for Trimble, Rippers available at an additional cost.

KOMATSU D65PX-18 70594

Rippers available at an additional cost.

KOMATSU D65PX-18 70592

Rippers available at an additional cost.

KOMATSU D39PX-23

Price: £30,000 GBP, Please call for further details.

KOMATSU D65PX-17

CAT 140M2 VHP PLUS 70612

Komatsu D51PX-24 70538

Rippers available at an additional cost.

Komatsu D39PX-24 70595

Wired for Trimble, Rippers available at an additional cost.

KOMATSU D61PX-24 70577

Rippers available at an additional cost.

CAT D6N LGP

CAT D6K LGP 70484

Rippers available at an additional cost.

VOLVO G940 50516

CAT D6N LGP 70589

Rippers available at an additional cost.

KOMATSU D65PX-18 70578

Rippers available at an additional cost

KOMATSU D65PX-18 70572

Rippers available at an additional cost

KOMATSU D65PX-18 70585

Rippers available at additional cost

Komatsu D39PX-24 70558

Rippers available at an additional cost. Trimble Wiring

KOMATSU D65PX-18 7100 hrs

Price: £85,000

CASE 850M LT 70503

CAT D6N LGP 70590

Rippers available at an additional cost.

KOMATSU D51PX-24 70545

THIS MACHINE HAS JUST HAD A 2000 HOUR SERVICE, Rippers available at an additional cost

KOMATSU D61PX-24 70583

Rippers available at an additional cost.

Komatsu D37PX-23 70518

Komatsu D37PX-23 70507

CAT CS66B 70480

Choice of Padfoot or Smooth Drum

CAT CS66B 70481

Choice of padfoot or smooth drum

CAT 140M2 VHP PLUS 50468

KOMATSU D65PX-18 70570

Rippers available at an additional cost

KOMATSU D61PXI-24

CAT D6N LGP

KOMATSU D61PX-23

KOMATSU D61PX-24

CAT D6N LGP

VOLVO G946B 70579

Pushblock, Cab, 14ft Moldboard, Ripper

Volvo G930B 70544

CAT D6N LGP

KOMATSU D61PX-23

DOZER BLADE – D39

Komatsu D39 Dozer Blade, 3300mm Wide x 1100mm Tall.

CAT D6N LGP

KOMATSU D39PX-23

Komatsu D51PX-24

CAT 12M2

Volvo G930B

BLADE – VOLVO GRADER

Volvo blade assembly

Front Blade – Volvo Grader

Front blade for sale, fits Volvo grader

VOLVO G940

KOMATSU D61PX-24

Rippers available at an additional cost.

Komatsu D51PX-24

Komatsu D61PX-24

CAT D6N LGP

Accugrade ready, auxiliary hydraulics, product link, drawbar. RIPPERS AVAILABLE

CAT D6N LGP

RIPPERS AVAILABLE

CAT 12M2 VHP PLUS

Cat D6K2 LGP

RIPPERS AVAILABLE

KOMATSU D65PX-17

Komatsu D39PXI-24

Rippers available at an additional cost.

KOMATSU D61PX-24 70547

THIS MACHINE HAS JUST HAD A 500 HOUR SERVICE, Rippers available at an additional cost.

KOMATSU D39PX-24

THIS MACHINE HAS JUST HAD A 500 HOUR SERVICE.