CAT D5 LGP

"

MACHINE KEY DETAILS

Make:
Caterpillar
Model:
D5 LGP
Stock No:
70997
Year:
2023
Hours:
4906
Location:
Southampton
Weight:
19170
HP:
172 HP
Enquire Online

Rippers Available

View Full Inspection Report

ENGINE
Blow by
No blow by
Knocking
No knocking
Air cleaners
Good
Any smoke
No smoke
Oil or fuel leaks
None visible
General running condition
Runs well
TRANSMISSION
Gear change
Good smooth change
Steering
Responsive
Oil leaks
None visible
Is the transmission noisy?
Minimal noise
Torque converter
No juddering, etc
Controls
Good tight controls
General running condition
Moves well
UNDERCARRIAGE
Shoe width
837mm
Shoe height
60mm, 95%
Shoes - any wear in trailing edge
Minimal
Rail height
120mm, 95%
Any signs of link failure
No
Average diameter of pins and bushings
63mm, 95%
Have pins been turned on chains?
No
Sprockets
19mm tips, 76mm gape 90%
IDLERS - UNDERCARRIAGE
Left side front idler
60mm x 20mm, 90%
Left side rear idler
60mm x 20mm, 90%
Right side rear idler
60mm x 20mm, 90%
Right side front idler
60mm x 20mm, 90%
TOP ROLLERS - UNDERCARRIAGE
Left side top roller
158mm x 154mm, 50%
Right side top roller
163mm x 157mm, 50%
BOTTOM ROLLERS - UNDERCARRIAGE
Roller 1
166mm x 170mm, 40%
Roller 2
167mm x 173mm, 40%
Roller 3
164mm x 172mm, 40%
Roller 4
163mm x 172mm, 40%
Roller 5
Visual only, 40%
Roller 6
161mm x 172mm, 40%
Roller 7
161mm x 172mm, 40%
Roller 8
159mm x 165mm, 40%
CAB
Cab mounts - any wear?
Minimal
Any wiring for laser system?
Yes
Back up alarm
Loud and clear
Battery isolator switch
Manual fitted and working
Lights
All lights working
Wipers
All working
Heater
Good heat
A/C
A/C is cold
Seat condition
In good condition
Cladding condition
Good
Floor mat condition
Undamaged
Seat belt
Good
Mirrors
Rear view only, no damage
Horn
Loud and clear
Cab mounts
Good mounts
Cab glass - any cracks?
No damage
Any perspex fitted
None fitted
Steps and grab handles secure?
All fitted, no damage
BLADE
Blade type
PAT
Blade width
3965mm
Blade height
1260mm
Pitch rams, wear
L/H: 1mm x 0mm, R/H: 2mm x 2mm
Lift ram, wear
L/H: 1mm x 1mm, R/H: 1mm x 1-2mm
Link ram, wear
2mm x 2mm
Tilt ram, wear
to be replaced
Ball joint, wear
10mm
C Frame, wear
2-3mm x 2mm
Equaliser bar, wear
3mm x 2-3mm x 1mm
Face / Moldboard
Good
Spill rack infection
Few dents
Cutting edges condition
40mm left
Have cutting edges been turned
No
General blade condition
Good overall
PAINT & DECALS
Any damage to panels
No damage to panels
Paint condition
Decent shape
Any areas repainted
No
Any rust patches
Minimal
Condition of decals
Fair condition
DIMENSIONS
Length
Width
Height
Measurements with blade straight
5250mm
3965mm
3270mm
Measurements with blade turned
6080mm
3630mm
3270mm
Measurement from outside to outside of tracks
2998mm
Measurements with blade straight
Length: 5250mm
Width: 3965mm
Height: 3270mm
Measurements with blade turned
Length: 6080mm
Width: 3630mm
Height: 3270mm
Measurement from outside to outside of tracks
Length:
Width: 2998mm
Height:

Enquire online

Compare to other Machines

Subscribe

Find out when new models come in