CAT D6K2 LGP

"

MACHINE KEY DETAILS

Make:
Caterpillar
Model:
D6K2 LGP
Stock No:
70835
Year:
2019
Hours:
3537
Location:
Southampton
Weight:
HP:
Enquire Online

PAT blade, rippers available at an additional cost.

View Full Inspection Report

ENGINE
Blow by
Minimal to none
Knocking
No knocking
Air cleaners
Good
Any smoke
Minimal to none
Oil or fuel leaks
None visible
General running condition
Good
TRANSMISSION
Gear change
HST works well
Steering
Responsive
Oil leaks
None visible
Is the transmission noisy?
No
Torque converter
Good
Controls
Good controls
General running condition
Moves well
UNDERCARRIAGE
Shoe width
758mm
Shoe height
43mm, 70%
Shoes - any wear in trailing edge?
Minimal
Rail height
107mm, 95%
Any signs of link failure?
No
Average diameter of pins and bushings
60mm, 95%
Have pins been turned on chains?
No
Sprockets
75mm gape, 15mm tips, good edges. 80%
TOP ROLLERS - UNDERCARRIAGE
Left side 1st roller
166mm x 167mm, 95%
Left side 2nd roller
166mm x 166mm, 95%
Right side 1st roller
166mm x 166mm, 95%
Right side 2nd roller
166mm x 166mm, 95%
BOTTOM ROLLERS - UNDERCARRIAGE
Roller 1
173mm x 174mm, 85%
Roller 2
174mm x 174mm, 85%
Roller 3
174mm x 174mm, 85%
Roller 4
Visual only, 85%
Roller 5
175mm x 174mm, 85%
Roller 6
174mm x 175mm, 85%
Roller 7
175mm x 175mm, 85%
Roller 8
Visual only, 85%
CAB
Cab mounts- any wear?
Minimal
Any wiring for laser system
Yes
Back up alarm
Loud and clear
Battery isolator switch
Fitted, manual
Lights
All working
Wipers
All working
Heater
Good heat
A/C
Nice and cold
Seat condition
All working, small burn
Cladding condition
Good condition
Floor mat condition
No wear or tears
Seat belt
working, no damage
Mirrors
Rear view only
Horn
Loud and clear
Cab mounts
Good mounts
Cab glass condition
good
Cab glass have any cracks?
No damage
Any perspex fitted?
None fitted
Steps and grab handles secure?
Fitted and undamaged
Blade
Blade width
3670mm
Blade height
1310mm
Main lift rams, wear
L/H: 2mm x 3mm, R/H: 2mm x 2mm
Pitch rams, wear
L/H: 3mm x 3mm, R/H: 4mm x 3mm
Ball joint, wear
2-3mm
Tilt ram, wear
1mm x 1mm
C-Frame, wear
3mm x 3mm
Equaliser bar, wear
1mm x 2mm x 1mm
Face / Moldboard
Good thickness
Spill rack condition
Straight, undamaged
Cutting edges condition
50mm left
Have cutting edges been turned?
No
General blade condition
Good
PAINT & DECALS
Any damage to panels
No damage
Paint condition
Fair condition
Any areas repainted
No
Condition of decals
To be replaced
DIMENSIONS
Length
Width
Height
Measurements with blade straight
4900mm
3670mm
2960mm
Measurements with blade turned
5700mm
3300mm
2960mm
Measurement from outside to outside of tracks
2765mm
Measurements with blade straight
Length: 4900mm
Width: 3670mm
Height: 2960mm
Measurements with blade turned
Length: 5700mm
Width: 3300mm
Height: 2960mm
Measurement from outside to outside of tracks
Length:
Width: 2765mm
Height:

Enquire online

Compare to other Machines

make
Caterpillar
model
D6N LGP
stock no
70795
year
2019
hours
5707
location
Southampton
weight
17,380 KGS
hp
170 HP
More Info

Subscribe

Find out when new models come in