Komatsu D51PX-24

"

MACHINE KEY DETAILS

Make:
Komatsu
Model:
D51PX-24
Stock No:
70538
Year:
2018
Hours:
2286
Location:
Southampton
Weight:
14,260 KG
HP:
131 HP
Enquire Online

Rippers available at an additional cost.

View Full Inspection Report

Engine
Knocking
No knocking
Blow By
Minimal to none
Oil Or Fuel Leaks
None visible
Any Smoke
No smoke
Air Cleaners
Good
General Running Condition
Runs really well
Transmission
Controls
Very good
Is The Transmission Noisy?
No
Oil Leaks
None visable
Steering
Responsive
Gear Change
HST smooth
General Running Condition
Very good
U/C
Shoe Width (mm)
710mm
Shoe Height (mm)
55mm, 85%
Shoes - Any Wear In Trailing Edge
No
Rail Height
115mm, 75%
Any Signs Of Link Failure
No
Average Diameter Of Pins And Bushings
59mm, 80%
Have Pins Been Turned On Chains?
No
Sprockets
16mm heads, good sprockets. 75%
IDLERS
Left Side Front Idler
15mm, 65%
Right Side Front Idler
15mm, 65%
TOP ROLLERS
Left Side 1st Roller
142mm, 142mm. 55%
Left Side 2nd Roller
144mm, 138mm. 50%
Right Side 1st Roller
145mm, 140mm. 55%
Right Side 2nd Roller
148mm, 143mm. 55%
BOTTOM ROLLERS
Rollers
Visual Only
Roller 4
L/H: 165mm, R/H: 162mm
Roller 5
L/H: 165mm, R/H: 165mm
CAB
Cab Mounts Any Wear?
Mounts are good
Any Wiring For Laser System
Yes
Back Up Alarm
Loud and clear
Battery Isolator Switch
Manual and electric
Lights
All lights working
Wipers
All work
Heater
Good heat
A/C
Nice and cold
Seat Condition
Works as should, no damage
Cladding Condition
Good clean condition
Floor Mat condition
No damage or wear
Seat Belt
Works as should
Mirrors
Rear view only
Horn
Loud and clear
Cab Mounts
Good
Cab Glass Condition
Minor wiper marks
Cab Glass Any Cracks
No cracks
Any Perspex Fitted
None fitted
Steps And Grab Handles Secure?
Present steps are good
BLADE
Blade Type
6 Way
Blade Width
3335mm
Blade Height
1170mm
main Lift Rams, Wear In Pins
L/H: Top: 2mm, Bottom: 1mm. R/H: Top: 1mm, Bottom: 1mm
Swivel Rams, Wear In Pins
L/H: 0mm. R/H: Top: 1mm, Bottom: 1mm
Tilt Ram, Wear
L/H: 1mm, R.H: 2mm
Ball Joint, Wear
10mm
Link Ram, Wear
Top: 5mm, Bottom: 1mm
C Frame, Wear
L/H: 4mm, R/H: 2 - 3mm
Equaliser Bar, Wear
L/H: 4mm, R/H: 3mm
Face / Moldboard
No damage
Cutting Edges Condition
40mm before turning
Have Cutting Edges Been Turned
No
General Blade Condition
Good condition
Panels & Paint/Decals
Any Damage To Panels
No damage
Paint Condition
Really good
Any Areas Repainted
No
Any Rust Patches
On Brack Frames
Condition Of Decals
Front damage, main have minimal scratches. To Be Replaced
DIMENSIONS
Length
Width
Height
Measurements With blade Straight
5010mm
3335mm
2900mm
Measurement With Blade Turned
5710mm
2895mm
2900mm
Measurement From Outside To Outside Of tracks
2590
Measurements With blade Straight
Length: 5010mm
Width: 3335mm
Height: 2900mm
Measurement With Blade Turned
Length: 5710mm
Width: 2895mm
Height: 2900mm
Measurement From Outside To Outside Of tracks
Length:
Width: 2590
Height:

Enquire online

Compare to other Machines

make
Komatsu
model
D51PX-24
stock no
70545
year
2017
hours
1840
location
Southampton
weight
14,260 KG
hp
131 HP
More Info
make
Komatsu
model
D51PX-24
stock no
70564
year
2017
hours
3167
location
Southampton
weight
14,260 KG
hp
131 HP
More Info

Subscribe

Find out when new models come in