KOMATSU D39PX-24 70699

SOLD
"

MACHINE KEY DETAILS

Make:
Komatsu
Model:
D39PX-24
Stock No:
70699
Year:
2019
Hours:
2436
Location:
Southampton
Weight:
10,350 KG
HP:
105 HP
Back to Previous Stock

Rippers available at an additional cost.

View Full Inspection Report

ENGINE
Knocking
No knocking
Air cleaners
Good
Any smoke
Minimal to none
Oil or fuel leaks
None visible
General running condition
Runs well
TRANSMISSION
Gear change
HST works well
Steering
Responsive
Oil leaks
None visible
Is the transmission noisy?
No
Controls
Good controls
General running condition
Runs / moves well
Undercarriage
Shoe width
700mm
Shoe height
38mm, 85%
Shoes - any wear in trailing edge
Minimal
Rail height
103mm, 75%
Any signs of link failure
No
Average diameter of pins and bushings
53mm, 75%
Have pins been turned on chains?
No
Sprockets
12mm Tips, 70mm gape. Sprockets in really good shape.
IDLERS
Left side front idler
62mm x 25mm x 33mm x 16mm. 16mm Running thickness with 2mm concave wear. 65%
Right side front idler
62mm x 25mm x 33mm x 16mm. 16mm Running thickness with 2mm concave wear. 65%
TOP ROLLERS
Left side 1st roller
153mm x 151mm, 60%
Right side 1st roller
153mm x 149mm, 60%
BOTTOM ROLLER
Roller 1
157mm x 158mm, 60%
Roller 2
163mm x 163mm, 60%
Roller 3
Visual only, 60%
Roller 4
165mm x 161mm, 60%
Roller 5
162mm x 162mm, 60%
Roller 6
Visual only, 60%
CAB
Cab mounts - any wear?
No wear
Any wiring for laser system?
Trimble wiring fitted
Back up alarm
Loud and clear
Battery isolator switch
Manual and electric
Lights
All working
Wipers
All working
Heater
Good heat
A/C
Good A/C, nice and cold
Seat condition
Good condition, all working
Cladding condition
Good clean condition
Floor mat condition
No wear or tears
Beacon
Amber and green fitted
Seat belt
Fully working, connected to beacon
Mirrors
Rear view only, no damage
Horn
Loud and clear
Cab mounts
Good cab mounts
Cab glass condition
Good condition, minimal marks
Cab glass have any cracks?
No cracks or damage
Any perspex fitted
None fitted
Steps and grab handles secure?
All fitted and undamaged
BLADE
Blade type
PAT 6 way
Blade width
3240mm
Blade height
1080mm including spill rack, 90mm
Lift ram, wear
L/H: 2mm x 2mm. R/H: 2mm x 2mm
Pitch ram, wear
L/H: 2mm x 2mm, R/H: 2mm x 2mm
Link ram, wear
1mm x 1mm
Tilt ram, wear
1mm x 1mm
Ball wear
4mm
C Frame, wear
7mm x 7mm
Face / Moldboard
Moldboard in good condition
Spill rack condition
Spill rack in good condition
General blade condition
Good shape
PAINT & DECALS
Any damage to panels
No damage to panels
Paint condition
Good condition, slightly faded
Any areas repainted
No
Any rust patches
Minimal
Condition of decals
To be replaced

Enquire online

Compare to other Machines

make
Ashland
model
155TS2
stock no
year
2017
hours
location
weight
hp
More Info

Subscribe

Find out when new models come in