KOMATSU D61PX-23 70656

SOLD
"

MACHINE KEY DETAILS

Make:
Komatsu
Model:
D61PX-23
Stock No:
70656
Year:
2015
Hours:
4569
Location:
Southampton
Weight:
18,660 KG
HP:
168 HP
Back to Current Stock

View Full Inspection Report

ENGINE
Knocking
No knocking
Air cleaners
Good
General running condition
Seems to run ok, bit of smoke
TRANSMISSION
Gear change
HST drive moves well
Steering
Responsive steering
Is the transmission noisy
No
Controls
Good controls
General running condition
Moves well
UNDERCARRIAGE
Shoe width
860mm
Shoe height
50mm, 85%
Shoes - any wear in trailing edge
Minimal wear
Rail height
115mm, 75%
Any signs of link failure?
No
Average diameter of pins and bushings
60mm, 75%
Have pins been turned on chains?
No
Sprockets
80mm Gape, 17 - 18mm tips. Good even wear, no chipping. 80%
IDLERS
Left side front idler
75mm x 20mm x 45mm, even wear. 23mm Running thickness, Minimal concave wear. 80%
Right side front idler
75mm x 20mm x 45mm, even wear. 24mm Running thickness, Minimal concave wear. 80%
TOP ROLLERS
Left side 1st roller
168mm x 168mm 85%
Left side 2nd roller
169mm x 170mm, 85%
Right side 1st roller
168mm x 169mm, 85%
Right side 2nd roller
170mm x 171mm, 85%
Bottom rollers
Roller 1
186mm x 184mm, 75%
Roller 2
Visual only, 75%
Roller 3
Visual only, 75%
Roller 4
VIsual only, 75%
Roller 5
189mm x 189mm, 75%
Roller 6
191mm x 190mm, 75%
Roller 7
Visual only, 75%
Roller 8
Visual only, 75%
CAB
Cab mounts - any wear?
Good mounts
Any wiring for laser system
Yes
Battery isolator switch
Manual and electric
Lights
All lights working
Wipers
All washers and wipers work
A/C
Working well
Seat condition
Seat base ripped, all functions work
Cladding condition
Good condition
Floor mat condition
Good condition, No wear or tears
Seat belt
Working
Mirrors
Rear view only, undamaged
Horn
Loud and clear
Cab mounts
Good mounts
Cab glass condition
Good condition, minimal scuffs
Cab glass any cracks
No damage or cracks
Any perspex fitted
None fitted
Steps and grab handles secure?
All fitted and undamaged
BLADE
Blade type
PAT 6 way
Blade width
3880mm
Blade height
1160mm
Swivel rams wear
Left: 1mm x 1mm, Right: 1mm x 1mm
Lift rams wear
Left: 2mm x 1mm, Right: 2mm x 1mm
C Frame wear
Left: 10mm, Right: 7mm
Link ram wear
2mm x 1mm
Tilt ram wear
1mm x 2mm
Ball joint wear
7mm
Equaliser bar wear
Left: 3mm, Mid: 4mm, Right: 2mm
Face / Moldboard
Good face, good thickness
Spill rack condition
No damage
Cutting edges condition
45mm left
Have cutting edges been turned?
No
General blade condition
Good condition
PAINT & DECALS
Any damage to panels
No damage to panels
Paint condition
Faded but fair
Any areas repainted
No
Any rust patches
Usual areas, track frames etc
Condition of decals
To be replaced

Enquire online

Compare to other Machines

make
Ashland
model
155TS2
stock no
year
2017
hours
location
weight
hp
More Info

Subscribe

Find out when new models come in