CAT D6K2 LGP

"

MACHINE KEY DETAILS

Make:
Caterpillar
Model:
D6K2 LGP
Stock No:
70806
Year:
2019
Hours:
4254
Location:
Southampton
Weight:
13,948 KGS
HP:
158 HP
Enquire Online

Rippers available at an additional cost.

View Full Inspection Report

ENGINE
Blow by
Minimal
Knocking
No knocking
Air cleaners
Good
Any smoke
No smoke
Oil or fuel leaks
None visible
General running condition
Runs well, sounds good
TRANSMISSION
Gear change
HST works well
Steering
Responsive
Oil leaks
None visible
Is the transmission noisy
No
Controls
Responsive controls
General running condition
Moves well
UNDERCARRIAGE
Shoe width
760mm
Shoe height
40mm, 65%
Shoes - any wear in trailing edge
Yes
Rail height
111mm , 20%
Any signs of link failure
No
Average diameter of pins and bushings
52mm, 20%
Sprockets
83mm gape, 12mm tips. 40%
UNDERCARRIAGE - IDLERS
Left side idler
75mm x 30mm x 40mm x 20mm, 50%
Right side ilder
75mm x 30mm x 40mm x 20mm, 50%
UNDERCARRIAGE - TOP ROLLERS
Left side 1st roller
153mm x 152mm, 50%
Left side 2nd roller
150mm x 152mm, 50%
Right side 1st roller
150mm x 152mm, 50%
Right side 2nd roller
153mm x 155mm, 50%
UNDERCARRIAGE - BOTTOM ROLLERS
Roller 1
Visual only, 20%
Roller 2
164mm & 163mm, 20%
Roller 3
161mm & 161mm, 20%
Roller 4
Visual only, 20%
Roller 5
158mm & 160mm, 20%
Roller 6
158mmm & 158mm, 20%
Roller 7
159mm & 158mm, 20%
Roller 8
Visual only, 20%
CAB
Cab mounts - any wear
Minimal wear
Back up alarm
Loud and clear
Battery isolator switch
Manual fitted
Lights
All working
Wipers
All working
Heater
Good heat
A/C
Nice and cold
Seat condition
Good condition
Cladding condition
Good condition
Floor mat condition
No ware or tears
Seat belt
Working as should
Mirrors
Fitted, undamaged
Horn
loud and clear
Cab mounts
Good mounts
Cab glass condition
Really good condition
Any cracks in cab glass
no cracks
Any perspex fitted
None fitted
Steps and grab handles secure?
All secure, undamaged
BLADE
Blade width
3640mm
Blade height
1280mm
Lift ram wear
L/H: 1-2mm x 1-2mm. R/H: 1mm x 1mm
Pitch ram wear
L/H: 1-2mm x 0mm. R/H: 1mm x 0mm
Tilt ram wear
2mm x 1-2mm
link arm wear
2mm x 2mm
Ball joint wear
5-6mm
C-Frame wear
L/H: 3-4mm, R/H: 4mm
Equaliser bar wear
2mm x 3mm x 2mm
Face / Moldboard
Good thickness, no damage
Spill rack condition
Straight, no damage
Cutting edges condition
25mm left
Have cutting edges been turned
No
General blade condition
Good blade all round
PAINT & DECALS
Any damage to panels
No panel damage
Paint condition
Really good, minor scuffs
Any areas repainted
No
Any rust patches
Usual areas
Condition of decals
To be replaced
DIMENSIONS
Length
Width
Height
Measurements with blade straight
4900mm
3640mm
2960mm
Measurements with blade turned
5700mm
3300mm
2960mm
Measurement from outside to outside of tracks
2760mm
Measurements with blade straight
Length: 4900mm
Width: 3640mm
Height: 2960mm
Measurements with blade turned
Length: 5700mm
Width: 3300mm
Height: 2960mm
Measurement from outside to outside of tracks
Length:
Width: 2760mm
Height:

Enquire online

Compare to other Machines

make
Caterpillar
model
D6K2 LGP
stock no
70797
year
2018
hours
4496
location
Southampton
weight
13,948 KGS
hp
158 HP
More Info

Subscribe

Find out when new models come in