Komatsu D37PX-23 70518

SOLD
"

MACHINE KEY DETAILS

Make:
Komatsu
Model:
D37PX-23
Stock No:
70518
Year:
2014
Hours:
1395
Location:
Cannock
Weight:
7,660 KG
HP:
91 HP
Back to Current Stock

View Full Inspection Report

ENGINE
Blow By
No
Knocking
No knocking
Air Cleaners
Clean, near new
Any Smoke
Clear when warm, Small on rev when cold
Oil Or Fuel Leaks
None visible
General Running Condition
Appears to run smoothly
TRANSMISSION
Gear Change
HST Good
Steering
Responsive
Oil Leaks
None visible
Is The Transmission Noisy?
No
Controls
Good
General Running Condition
Really good
U/C
Shoe Width (mm)
600mm
Shoe Height (mm)
39mm, 75 - 80%
Shoes - Any Wear In Trailing Edge
Minimal wear
Rail Height
88mm, 85%
Any Signs of Link Failure
No
Average diameter Of Pins And Bushings
52mm, Minimal wear 75%
Have Pins Been Turned On Chains?
no
Sprockets
Good condition, 70%
IDLERS
Left Side Front Idler
Visual only, Looks really good. 90%
Right Side Front Idler
Visual only, Looks really good. 90%
TOP ROLLERS
Left Side Top Roller
140mm, 138mm. 90%
Right Side Top Roller
140mm, 139mm. 90%
BOTTOM ROLLERS
Bottom Roller 1
Visual only, 85%
Bottom Roller 2
L/H: 168mm, 85%. R/H: 168mm, 85%
Bottom Roller 3
L/H: 166mm, 85%. R/H: 166mm1 85%
Bottom Roller 4
L/H: 166mm, 85%. R/H: 166mm, 85%
Bottom Roller 5
L/H: 167mm, 85%. R/H: 168mm, 85%
Bottom Roller 6
Visual only, 85%
CAB
Cab Mounts- Any Wear?
None
Back Up Alarm
Loud and clear
Battery Isolator Switch
Manual and electric fitted
Lights
All lights working
Wipers
All working, all washers work
Heater
Good Heat
A/C
Nice and cold
Seat Condition
Works as should, really good condition
Cladding Condition
Really good and clean
Floor Mat Condition
No damage, really clean
Seat Belt
Mechanically sound, electrically not
Mirrors
Rear view only, clean
Horn
Loud and clear
Cab Mounts
No failed mounts
Cab Glass condition
Really good
Cab Glass Any Cracks
No cracks
Any Perspex Fitted
None Fitted
Steps And Grab Handles Secure?
All present and straight
BLADE
Blade Type
6 Way
Blade Width
3080mm
Blade Height
850mm
Main Lift Rams, Wear in Pins?
L/H: Top: 1mm, Bottom: 1mm. R/H: Top: 1mm, Bottom: 2mm
Swivel Rams, Wear In Pins?
L/H: Top: 2mm, Bottom: 1mm. R/H: Top: 2mm, Bottom: 1mm
Tilt Ram, Wear?
L/H: 3mm, R/H: 1mm
Ball joint Wear?
4mm
C-Frame Wear?
L/H: 1 - 2mm, R/H: 2mm
Link Ram, Wear?
Top: 2mm, Bottom: 2mm
Spill Rack Condition
Straight - No damage
Cutting Edges Condition (mm)
45mm
Have Cutting Edges Been Turned?
Yes
General Blade Condition
Really good
PANELS & PAINT / DECALS
Any Damage To Panels
Yes
Paint Condition
Really good
Any Areas Repainted
No
Any Rust Patches
Usual Area around under carriage
Condition Of Decals
Really good, front damaged

Enquire online

Compare to other Machines

Subscribe

Find out when new models come in